Home ﹥ Products > Industrial Ethernet Switch > Unmanaged > DS201
DS201
Industrial 1-port Giga Ethernet to Fiber Media Converter
The industrial-grade fiber optic media converter DS201 can operate in either low latency converter mode or store & forward switching mode. The fiber interface supports 100Mbps/1000Mbps SFP by dip switch configuration. It detects and changes to switch mode if the copper and fiber speed or duplex are different. In converter mode, the Link Fault Pass-Through (Link Loss Forwarding) reaches low latency with bi-directional alert and auto-recovery. The 16Kbytes jumbo frame forwarding capability guarantees high-speed Giga communications. Wide operation temperature -40~75C and heavy industrial EMC design brings DS201 suitable for any industrial application.
Ethernet Media Converter
Dual Forwarding Modes
Industrial Compliance
Ethernet Media Converter
•Converts Optical Signal and Gigabit Ethernet Electrical Signal
•SFP Socket Supports IEEE 802.3u 100Base-FX, IEEE 802.3az 1000Base-FX
•RJ-45 supports IEEE802.3u 100Bas-TX, IEEE802.3ab 1000Base-TX
Link Fault Pass Through / Link Loss Forward
•Bi-Directional Link Loss Forwarding for Real Time Far-End Fault Link Alert
•Bi-Directional Auto Recovery for Ethernet Optical Fiber and Ethernet RJ-45 Communication
Dual Forwarding Modes
Pure Converter:
- RJ-45 and Fiber working in balanced Speed and Duplex mode
- Minimum Forwarding Latency – 8.2x10-9 Sec.
Ethernet Switching Store-and-Forward:
- RJ-45 and Fiber working in un-balanced speed and duplex mode
- TX 100/1000Mbps Auto-Negotiation, Auto MDI/MDI-X
- IEEE 802.3x Flow-Control & Back-Pressure
- CRC Error Packet Filtering
- 16Kbytes Jumbo frame for Gigabit speed forwarding
Industrial Compliance
- IEC 61000-6-2/ IEC 61000-6-4 Heavy Industrial EMC
- EN 50121-4 Railway Track Side EMC
- High-Level Electro Magnetic Susceptibility – Level 3
Easy DIP switch Configuration
Hardened System Design
Special Vertical Market Application
- Forced RJ-45 100Mbps Half Duplex
- Forced Fiber 100Mbps
- Link Fault Pass-Through / Link Loss Forward
Hardened System Design
- Operates Under -40 ~75°C Environment
- Wide Range Redundant Power Input, 10~60Vdc or AC18~30V
- Ingress Protection – IP31
- Minimal Install Space Requirement
- Easy Cable Reorganization
Special Vertical Market Application
- Factory Automation – Real-Time Machine Communication
- Railway Track Side – PLC Communication
- Low AC Voltage application – AC18~30V Building Automation
DS201 | Industrial Gigabit Ethernet Fiber Media Converter, 1 RJ-45, 1 SFP Socket, Redundant Power, DC 10~60V, AC18~30V |
Package List | |
1 x Product Unit | |
1 x 4-pin Removable Terminal Connector | |
1 x Attached Din Clip | |
1 x Quick Installation Guide |